The Blum AVENTOS HK 20K7011 opening-angle stop mechanically restricts the maximum opening travel of a compatible legacy AVENTOS HK lift mechanism to approximately 75°. It is intended for cabinet installations where the available space does not allow the front to complete its unrestricted upward movement.

Stock code HI20K7011 identifies this specific legacy AVENTOS HK accessory. It must not be confused with Blum article 20K7A11, which is the different 75° opening-angle stop for the current AVENTOS HK-S system.

Control the cabinet front's opening travel

Once correctly fitted to the compatible lift mechanism, the stop limits how far the cabinet front can travel upwards. The restricted 75° position can be useful beneath a ceiling, cornice, shelf or another nearby feature where a wider opening angle would provide insufficient clearance.

The available space must still be measured before installation. An opening-angle stop limits movement but does not guarantee that the cabinet front, handle or surrounding fittings will avoid every possible obstruction.

Compatibility must be checked carefully

Blum has produced several AVENTOS stay-lift generations with similar-looking accessories. Article 20K7011 is intended for compatible legacy AVENTOS HK mechanisms. Do not select it solely because another mechanism is described as AVENTOS HK-S, HK-XS or HK top.

Check the article number on the existing lift mechanism and consult the applicable Blum installation information before ordering. Customers with a current HK-S system should instead view the AVENTOS HK-S 75° opening-angle stop.

Key features

• Genuine Blum opening-angle accessory
• Blum article number 20K7011
• Stock code HI20K7011
• For compatible legacy AVENTOS HK mechanisms
• Restricts maximum opening travel to approximately 75°
• Passive mechanical operation
• Grey RAL 7037 colour
• Useful where overhead clearance is limited
• Different from AVENTOS HK-S article 20K7A11

Product details

• Manufacturer: Blum
• Range: Legacy AVENTOS HK
• Blum article number: 20K7011
• Stock code: HI20K7011
• Product type: Opening-angle stop
• Restricted opening angle: 75°
• Colour: Grey RAL 7037
• Compatibility: Compatible legacy AVENTOS HK lift mechanisms
• Supplied quantity: 1 piece per unit purchased

Installation guidance

1. Confirm that the lift mechanism is compatible with Blum article 20K7011.
2. Measure the available cabinet-front and overhead clearance.
3. Follow the installation instructions for the applicable legacy AVENTOS HK mechanism.
4. Fit the required stop securely in the specified mechanism position.
5. Open the cabinet front slowly and confirm that its final position provides sufficient clearance.

Check how many lift mechanisms are fitted and order the appropriate number of stops. 1 stop is supplied per unit purchased.

Frequently asked questions

What does the Blum 20K7011 opening-angle stop do?

It mechanically limits a compatible legacy AVENTOS HK cabinet front to an opening angle of approximately 75°.

Is it compatible with AVENTOS HK-S?

No compatibility with HK-S should be assumed. Article 20K7011 is for compatible legacy AVENTOS HK mechanisms; the current HK-S 75° stop is the different Blum article 20K7A11.

Is this the 100° version?

No. This is the 75° stop. The corresponding legacy AVENTOS HK 100° accessory is Blum article 20K7041.

Will it prevent every possible collision?

No. Measure the available clearance and test the completed installation carefully. Suitability depends on the cabinet layout, front dimensions and surrounding obstructions.

How many opening-angle stops are supplied?

1 stop is supplied per unit purchased. Check how many lift mechanisms require a stop before ordering, and browse the Blum AVENTOS components range for related accessories.