The Blum AVENTOS HK 20K7041 opening-angle stop limits the maximum opening travel of a compatible legacy AVENTOS HK lift mechanism to approximately 100°. It is intended for cabinet installations where the unrestricted lift-front movement would provide more opening travel than the available space requires.

Stock code HI20K7041 identifies this specific legacy AVENTOS HK accessory. It must not be confused with Blum article 20K7A41, which is the different 100° opening-angle stop for the AVENTOS HK-S system. Supplied as one piece.

Control the cabinet front's opening travel

Once correctly fitted to the compatible lift mechanism, the stop mechanically restricts the upward travel of the cabinet front. A 100° opening angle maintains broad access to the cabinet while reducing the movement compared with an unrestricted installation.

This can be useful when planning a cabinet beneath a ceiling, cornice, shelf or another nearby feature. The available clearance must still be measured before installation because a 100° stop does not guarantee collision-free operation in every cabinet layout.

Compatibility must be checked carefully

Blum has produced several AVENTOS stay-lift generations with similar-looking opening-angle accessories. Article 20K7041 is for the compatible legacy AVENTOS HK system. Do not select it solely because another mechanism is described as AVENTOS HK-S, HK-XS or HK top.

Check the article number on the existing lift mechanism and consult the relevant Blum installation information before ordering. The current AVENTOS HK-S 100° stop is article 20K7A41 and must be treated as a separate product. Browse current AVENTOS HK-S accessories if your mechanism is HK-S.

Key features

• Genuine Blum opening-angle accessory
• Blum article number 20K7041
• Stock code HI20K7041
• For compatible legacy AVENTOS HK mechanisms
• Restricts maximum opening travel to approximately 100°
• Passive mechanical operation
• Grey RAL 7037 colour
• Supplied as one piece
• Useful where overhead clearance is limited
• Different from the AVENTOS HK-S article 20K7A41

Product details

• Manufacturer: Blum
• Range: Legacy AVENTOS HK
• Blum article number: 20K7041
• Stock code: HI20K7041
• Product type: Opening-angle stop
• Restricted opening angle: 100°
• Colour: Grey RAL 7037
• Quantity: 1 piece
• Compatibility: Compatible legacy AVENTOS HK lift mechanisms

Installation guidance

1. Confirm that the lift mechanism is compatible with Blum article 20K7041.
2. Check the available cabinet-front and overhead clearance.
3. Follow the installation instructions for the applicable legacy AVENTOS HK mechanism.
4. Fit the required stop securely in the specified mechanism position.
5. Open the front slowly and confirm that its final position provides sufficient clearance.

Check how many lift mechanisms are fitted and order the required number of opening-angle stops accordingly. This product is sold as one piece per unit.

Frequently asked questions

What does the Blum 20K7041 opening-angle stop do?

It mechanically limits a compatible legacy AVENTOS HK cabinet front to an opening angle of approximately 100°.

Is it compatible with AVENTOS HK-S?

No. Article 20K7041 is for the legacy AVENTOS HK system. The current AVENTOS HK-S 100° stop is the different Blum article 20K7A41.

Is this the 75° version?

No. This is the 100° stop. The corresponding legacy AVENTOS HK 75° stop is article 20K7011.

Will it prevent every possible collision?

No. Measure the available clearance and test the completed installation carefully. Suitability depends on the cabinet layout and front dimensions.

How many stops are supplied?

This product is supplied as one piece. Check how many lift mechanisms are fitted and order accordingly. Browse the full Blum AVENTOS components range for compatible accessories.